Truck tyre: 4 salient features & buying tips

Most of the tyres have coverage against defects and wear but the best ones features tread warranty as well. A prorated warranty guarantees tread that would last to a defined number of miles and the longevity for truck tyre is approximately six years or 70,000 miles.

Unless you drive the truck only for dedicated off-roading, a typical truck tyre should just deliver smooth and comfortable ride on dry pavement irrespective of the tyres being all-season or all-terrain. You’d probably drive on paved tracks if the vehicle is primary source of transportation.

Off-roading ask for better grip and it depends on tyre quality as best ones would easily adapt to any condition be it muddy, wet pavement or gravelly. If gas mileage or long-term price is a top priority, truck tyre with low rolling resistance are preferred the decreases traction and boost miles per gallon.

Here’re a few details to go along with before you buy a pair!

  1. Street performance OR off-road traction

Different categories of tyres for trucks have their own advantages and pitfalls. To decide which one’s best for you, consider your driving habit, terrain and weather. All-season tyres are for pavement driving whereas all-terrains are best for those who hit the roads frequently while engaged in occasional light-duty off-roading. Knobby tread patterns and rigid sidewalls can be seen on mud tyres which allow them to climb rocks, skim smoothly on muddy tracks without bogging down or punctured.

  1. Tread wear ratings

Most tyres come with Uniform Tyre Quality Grade (UTQG) which is a specification for temperature, tread wear and traction/grip. Theory goes like this; higher the tread wear rating, longer the truck tyre would last. However, this isn’t always the case and experts warn buyers to be careful of the count. Tread wear rating also indicates hardness of the tyre compound and determinant of longevity. Yet again, this isn’t beneficial for all drivers whereas softer compound provides better grip. High-performance tyres have better traction, lower tread wear hence a shorter life span.

  1. Size matters

Industry experts recommend replacing the tyres with same size and features as slightest indifference may hamper overall driving. If you’re unsure of the size, check owner’s manual or sticker usually found on the driver’s door inside panel. Driving the vehicle with mismatched truck tyre would only wreck the ABS system especially if it carries a particular traction control system. Another important fact for tyres is to match exactly side-to-side, must never run on biased plied wheels on one end with radials on another.

  1. LT v/s P-tyres

LT represents Light Truck and these tyres are designed typically to carry the weight of full sized SUVs, lighter trucks and vans. Tyres that bear a “P” or simply no prefix at all are identical and aren’t meant to carry too much load. Taking vehicle’s weight into consideration means you can conveniently put on the tyres on a light truck but with certain limitations.


The above features and tips form the basis when it comes to buy a perfect truck tyre.

You may also like...

Leave a Reply

Your email address will not be published.